Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What is the part # for Doromatic pinion cam?

Resolution: Part numbers are: 4270903177 for 1 each CAM.102 for a package of 10:

Is Request to Exit (RX) available on Von Duprin exit devices?

Resolution: For Chexit devices with solenoid driven shipped from the factory prior to 8-24-2015, the RX switch is ordered as a "Special CX RX Switch". It may only be installed on existing devic...:

Can you order an ND85 with a Primus cylinder?

Resolution: A Primus Hotel cylinder (as well as an IC Hotel Cylinder) is not possible because there isn't enough room inside the cylinder for all of the required components. :

Can a 33/3547A be used on a wood door?

Resolution: You can install the 33/3547A exit device on a wood door.:

What is the replacement for the 101+ and the M390DEL

Resolution: The M490DE/DEPs is the current :

Can you change the handing in the field of a EL1490?

Resolution: No. The handed baseplate must be purchased: KIT.1011 EL1490 Conversion Kit LHR 36" - KIT.1010 EL1490 Conversion Kit RHR 36" - KIT.1013 EL1490 Conversion Kit LHR 48" - KIT.1012 ...:

How to convert a ND series lock cylinder format from PD to BD?

Resolution: On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...:

What is the part number for a L mortise lock spindle?

Resolution: The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1. Spindles and Springs Part Number Description L283-060 Spindle and spring, 1...:

What are the MA lock electrical requirements?

Resolution: For additional details and a wiring diagram see the MA service manual page on electrical requirements here.:

What is the size of the Falcon Gala Rose?

Resolution: See picture below for commonly requested dimensions of the Gala Rose. Gala Rose dimensions :