Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can the Von Duprin Chexit device be changed to ALK exit alarm?

Resolution: The Chexit device has a different base plate and center case than the ALK. The Chexit device would need to be replaced with an ALK device.:

Can I put an old style hex dogging kit (050153) on my 99 panic device?

Resolution: We don't recommend to use the old style hex dogging kit into the new 98/99 exit device but it would fit as long as the device is not fire rated.:

Will Falcon B locks prepped for BD accept a 6 or 7 pin core?

Resolution: The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core). The tailpiece shown below is used for bo...:

What is the part number for the lever return spring for the old M series mortise lock?

Resolution: Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...:

Do we offer a self centering pivot?

Resolution: We do not offer a self centering pivot.:

Can you install a 4041 pull side at 180 degrees?

Resolution: The maximum opening is 120° with the 4041/4041XP standard templating on the pull side of the door.For pull side mount, you can achieve 160° of door opening with ST-2359, which consists of...:

Are the mounting studs on 990 trims located where the studs for the 996 trims are located?

Resolution: The 4 main mounting studs are located in the same position, but the 990 trims have a 5th stud located at the bottom of the pull handle.:

What special template is used with a 3130 closer and swing clear hinges?

Resolution: ST-1716 is used to mount a 3130 closer with swing clear hinges. Special Templating only, no special parts.:

Do LCN closers come with thru bolts?

Resolution: The standard screw pack for an LCN closer is the SRT (Self Reaming and Tapping) screw. Thru bolts are an option, but must be specified on the order. There is no charge for them, but they do need to...:

What replaced the B160 B162 and B180 deadbolts?

Resolution: The BC100 series deadbolt replaced the B100 series in June of 2000. No parts are still available.: