Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Is the 33A/35A or 98/9947-F available less the top and bottom rods?

Resolution: Due to UL requirements a complete device must be shipped. LBR (less bottom rod) is an option for the fire rated devices.:

How much top rail is needed on a 4041 REG/PA (Rw/PA)?

Resolution: To install a 4041/4040XP with Rw/PA or Hw/PA arm, you need a minimum of 5-3/8" top rail on the door, measured from the bottom of the stop. If the top rail is less than 5-3/8", you will need to use ...:

Are ND locks available in 629 or 630 finishes?

Resolution: The AL and ND locks are not available in any stainless steel finishes. The only option is either the 626 satin chrome or 625 bright chrome.:

What is the part number for the spindle for a 373L control?

Resolution: Part number for the 373L spindle is #967480-89:

What is the part number for 4041/4040XP door closer cylinder?

Resolution: The 4040/4041 closers have been replaced with the 4040XP closer. The 4040XP cylinder replaces all the older versions. There are 2 cylinder "only" option's for the 4040XP series. The 4040XP-3071(...:

Does the M490DE meet the NFPA 101 standard?

Resolution: Yes the M490DE is compliant with the NFPA 101 specification:

Should doors be reinforced for continuous hinges?

Resolution: Hinge manufacturers do not require or recommend that doors should be reinforced for continuous hinges. Steelcraft does not reinforce for continuous hinges unless it is specified on the customers' P...:

How to put a 390DEL maglock into programming mode

Resolution: red ibutton or 97531* on keypad if equipped:

What electric strike will work with 1590?

Resolution: The 6112 electric strike is the only strike that will work due to the size of the latch-bolt on the 1590.:

Can you connect an external horn to a Chexit device?

Resolution: Chexit devices shipped prior to 8-24-2015 with solenoid driven:Use the external alarm contact, blue and brown wire on Chexit device.Connect the blue wire to the red wire and connect the brown wire ...: