Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
FAQs
«
1059
1060
1061
1062
1063
»
Question
Answer
What is the dimensions of the 4600 metal cover?
Resolution:
The 4600 (4630 and 4640) metal cover is 33-1/2" L x 4-3/8" W x 5-1/4" D.:
What is the 9540DPS unit?
Resolution:
The 9540DPS, 9550DPS, and 9560DPS is a Sr. Swing push side unit with a Door Position Switch (8310-805C) that is installed in the arm and the spindle plate. Recommended for blow open applicati...:
Can a LCN 3130 closer be used on a 4 foot interior door?
Resolution:
You would use/order a 3133 closer X ST 2492 for a 4’ 0” interior door. Please Note: This special cylinder will NOT meet ADA of 5 lbs opening force.This application uses a special cylinder but...:
When was the LCN 4030SE closer discontinued?
Resolution:
The LCN 4030SE closer was discontinued back in the early 1980's. There is no direct replacement.:
Are the ME, SE, and HSA -3210 LCN transformers the same?
Resolution:
Yes the LCN -3210 step down transformer is the same for all LCN series.:
Can a surface mounted Sr Swing be used with Pocket Pivots?
Resolution:
You can use a Sr Swing, push side mounted with pocket pivots (use the push arm butt hinge/OP template) but you can't use the pull side mounted Sr Swing with pocket pivots because the swing of the d...:
Where can I find installation instructions for the Schlage CS210?
Resolution:
Installation instructions can be found on commercial.schlage.com. Click here for instructions.:
What is the size of the LCN pneumatic control boxes?
Resolution:
All LCN 7900 and 7980 series pneumatic control boxes are 15" X 15" X 6".:
Can you mount a 4640 on a 32” door?
Resolution:
You can use ST-3071 to mount a 4640 on a 32” door. This will give the unit a 120 degree of power opening and the closer must be able to hang over the frame face at the hinge edge. No s...:
Can you mount a 4040XPT pull side with swing clear hinges?
Resolution:
For you to use a 4040XPT mounted pull side on a door with swing clear hinges use ST-3471. This application limits the door swing to maximum 110 degrees. :
«
1059
1060
1061
1062
1063
»