Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: The 4040/4040XP closer mountings have the following maximum opening degree templating: The 4040/4040XP PA "Regular Arm" mount will allow for 180° max. opening. The 4040/4040...:

What parts are needed to convert an 88TP to 88NL?

Resolution: To convert the 88TP to 88NL, device needs a correct back plate conversion kit, part number 050101 and a new 880NL trim.:

Which electrified hinge is required or recommended for use with EL devices?

Resolution: Recommend at least a 4 wire hinge and double up the wires for EL application.:

Is there a Schlage lock with a toggle button?

Resolution: The only Schlage lock with a toggle was the discontinued K-Series mortise lock.:

What is the difference between ED and EL for Doromatic devices?

Resolution: EL only retracts the latchbolt or vertical rods/latches. Pulling on or tampering with the push bar has no effect on the solenoid plunger remaining seated in the solenoid. ED retract...:

What is the part number for the E996L rim conversion kit?

Resolution: The 050672 is the part number for rim or vertical rod device and 050673 for the mortise device.:

What is the part # for the 4040 regular arm?

Resolution: The 4040 regular and hold open arms are different. You would have to get a different arm to convert from regular arm to a hold open function. 4040-3077 for a regular arm. 4040-3077L for a long ...:

Can a 4630 arm be used on a 4610?

Resolution: The arms did not change and are interchangeable.:

How many change or user keys are supplied with a lock?

Resolution: Two change or user keys are supplied with each lock.:

Can I use the 990 DT trim with a fire rated device?

Resolution: The 990DT trims are not recommended on fire rated openings. Since you cannot dog the device and the device is not electrified you are inviting people to pull on a door that will not open and possib...: