How do you order a Senior Swing header for a 2810 on one leaf and a 2010 on the other?

LCN does offer a 2810 Senior Swing / 2010 manual closer combo for a pair of doors.  Both units contained within the same Senior Swing header.
 

To order a paired operator with a 2810 on one leaf and a 2010 closer on the other, you would order a:

• 2810  OP (offset pivot) x DD (double door) x MP (manual prep). Specify header length, handing, and finish for the Sr. Swing 2810.
• Order the 2010 closer separately. Specify hand and finish for the 2010 closer.

The 2810 x DD (double door) x MP (manual prep) can ONLY be done with an OP (offset pivot) arm, not the CP (center pivot) arm, and ONLY with 2010 Series closer (no 2030 series).

To order a paired operator with (2) 2010 closer on both ends you would order a:

• 2850-3572 HL (header length) x MP (manual prep) on both ends (for a manual prep on each side). Specify header length and finish.
• 2850-3072 concealing channel x  MP (manual prep) x RH x length (1/2 header length or door width if unequal pair) x finish.
• Order the (2) 2010 closers separately. Specify hand and finish for the 2010 closers.

To order a single 2810 header prepped for a 2010 manual closer (no operator prep) you would order:

2810-3572HL X Length X SC X Finish - NOTE-Manual Prep Only, No operator prep.  Then on separate line order the 2810-3072MP (manual concealing channel) X Length X hand X Finish.