Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ EPT with offset pivot ”

RELATED FAQS

Question
Answer
What hinges can an EPT be installed with?
EPT can be used on following hinges: Degree of the opening Hinge type Door thickness 0-180 degree Up to 5" butt hinges 1 3/4" 0-180 degree Up to 3/4" offset pivots 1 3/4" 0-130 degree 5 1/2"...
See related solution: Can an EPT be used with Cam Lift Hinges?
What mounting options are available with the 2030 Series closer?
The 2030 Instructions included with the unit has templates for mounting with standard butt hinges, center pivots, and offset pivots.
Can a 450 overhead be used on a 48" wide door hung with butt hinges or offset pivots?
The 455 can be mounted on a 48" wide door, but we cannot guarantee that it will withstand the forces involved.  Recommend using 906 instead.
Can a Bar Coordinator be used with Offset Pivots?
There is a small chance that this combination could work, but it often does not work properly. Because of the location of the pivot point, the active door lever of a Bar Coordinator (COR32, C...
What is the new number for the discontinued LCN CP150 center hung pivot?
The 7253 is the Ives pivot set that replaced the LCN CP150.  
Will a Senior Swing work with swing clear hinges?
Push Side Surface Mount Senior Swing can be used with swing clear hinges, standard templating. Pull Side Surface Mount Senior Swing cannot be used, the pull arm will hit the back of door at approxi...
How do you order a Senior Swing header for a 2810 on one leaf and a 2010 on the other?
LCN does offer a 2810 Senior Swing / 2010 manual closer combo for a pair of doors.  Both units contained within the same Senior Swing header. To order a paired operator with a 2810 on&nb...