Some Access Control Panels are designed with “Supervised” or “Dry contact” requirements for the inputs and have no common ground between the ACP (Access Control Panel) and device at the door. “Supervised” or “Dry contact” interfaces require a dry contact state change, like a relay or a switch closure, when monitoring activity at the opening. Access Control Panels that have “Supervised” or “Dry contact” interface inputs cannot read the outputs of the PIB300-TD2 and PIM400-TD2 without the use of a Relay Board (RLBD).
Schlage offers the “RLBD” to support these supervised or dry contact interface applications.
The "RLBD" plugs directly into the PIM400-TD2 or PIB300-TD2 for easy hook-up.
Please reference this Tehnical Note RLBD SES-20120418 for RLBD setup, use information, hook-up diagrams and some testing suggestions when connecting to a Supervised dry contact Access Control Panel.
This is a link to the RLBD Installation Instructions.
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.