Yes. The AD-200 and CO-200 each can be managed through manual direct lock keypad programming or PC software programming using an HHD to transfer programming information to the lock.
The physical lock Keypad option is mandatory for local manual lock programming.
Either Schlage Express or SMS Select PC software can be used to program the AD200 and CO200 locks using the HHD. Once a lock has been programmed with an HHD and PC software, local manual lock programming is disabled. To re-enable local manual lock programming, the lock has to be Second Level Factory Default Reset and this process clears ALL current lock programming, whether manual or PC programmed, and sets the lock back to the Out of Box Factory Default condition, with all default codes restored. (See User Guide Manual, page 11 for details)
User and Install Guides are available on www.schlage.com/support
Link for AD-200/AD-201 User Guide and Manual Programming process on pages 6 to 9
Link for CO-200 User Guide and Manual Programming process on pages 6 to 9
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.