WHAT IS MORTISE CYLINDER

RELATED FAQS

Question
Answer
MPD; FEH
With split key construction keying there are two ways the construction insert is retained in the cylinder so that it won't fall out the back end of the plug, see Figure 1.  The&nb...
75, 5575, 8875, 9875, 9975, 9475, 9875 Series, 9975 Series, 5575 Series, 8875 Series
See table below for part numbers. Table 1: 09-900 part number variations
Mortise Latch
The Sargent cams listed below work for all applications except 16 inside and 50 outside.  The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...
A mortise lock with a built-in interconnected auxiliary deadbolt.
Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077.  The...
86, 86ED, 86EDR, 86EDV, 86R; Sectional Trim, mortise hinge, deadlock, door bottom
Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted.    This will occur if the outside spindle (square post) is install...
Double cylinder mortise lock - Deadbolt is operated by key on either side. - Caution: Double cylinder locks on residences–or on any door in any structure which are used for egress–are a life safety...
Unless otherwise specified on an order, the cam supplied on Falcon mortise cylinders will be the following: Non-IC mortise cylinder is the 5622-STD. IC mortise cylinder is the 5622-IC. Related...
Cams for other applications may be specified with no additional charge, see pricebook.
Cylinder by thumbturn mortise lock - Deadbolt is operated by key outside or thumbturn inside.
Click here for a list of available Schlage cams comparable to the Sargent 13-0660.
The Falcon MA-Series requires a different cam for keyed functions than its predecessor the Falcon M-Series.
 
 
9875-F Series,9975-F Series , 5575-F, 8875-F
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mouting holes that allow for the cams to be mounted inverted...