serial number range

RELATED FAQS

Question
Answer
CO-100 now allows the PIN code length to be changed manually.  Each CO100 has a label that indicates its firmware revision.  Firmware revision 2.5.0 or higher support these...
CO-100 PIN length can range from 3 digits to 6 digits with firmware version 2.5.0 and higher.
Procedure to change PIN length: 1. Press {programming code (default is 97531)} then {*}.2. Press {99} then {*}, to enter Special Function Length Menu.3. Press {4} then {*}, to enter Pin Length M...
CO-100 now has NEW lock status reporting capabilities. Battery status, firmware version, hardware version and PCB serial number. See instructions below for these status menus.
Older units with 6 digit serial numbers dating before July 2004 will require a main board change with a change in the camera.
Yes, press the * (asterisk) key 10 times on the reader.  The serial number will be displayed.  A second way of locating the serial number on the reader is to visually check...
When the Ethernet communications suddenly stop working on a biometric hand reader, there is the set of questions to ask the customer to start the troubleshooting process.  They are detail orie...
Type of smart card format whose serial number is readable by AD Series proximity and multi-technology readers.