Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
L lock certifications
”
RELATED FAQS
Question
Answer
What is the Buy American Act (BAA)?
Resolution:
To obtain product certification forms:Download the BAA Catalog on the Allegion website Complete the information requested in the the BAA Catalog with a detailed copy of the prod...:
What certifications does the B500 meet?
Resolution:
The B500 deadbolts meet the following certification: ANSI A156.5, 2001, Grade 2. Available UL Listed for 3-hour fire door.:
What backsets are available on Schlage and Falcon locks?
Resolution:
SCHLAGE locks are available with the following backsets: Lock Series Lock Type ...:
What is the part number for the inside lever on an L9000 lock?
Resolution:
The part number is the 09-402, specify the design and finish.:
How can the Von Duprin 98/9975-L with 996L classroom trim function be converted as a night latch function in field?
Resolution:
The following steps are required to convert the Von Duprin 98/9975L from classroom to night latch function: Order new 996L-NL-M trim and reset NL drive screw in mortise lockbody as se...:
What is the part number for the outside trim assembly on L9000 mortise locks?
Resolution:
Outside Knob/Lever and Rose/Escutcheon Assemblies Part Number Description A Rose with Knob/Lever 09-506 Designs: 01 02 03 05 06 07 12 17 18 OME 41 42 09-655 Des...:
How to build an L-Series chassis.
Resolution:
This Step-by-Step guide is specifically designed for the functions listed below, however, it can be referenced with a majority of L series functions since most of the parts are ...:
What are the part numbers for the inside and outside knobs for the L series?
Resolution:
Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish:
Is the Schlage Latitude and Longitude lever available in a stainless steel finish?
Resolution:
Beginning January 2, 2013 Schlage will offer the Latitude (LAT) and Longitude (LON) levers in the 629 and 630 stainless steel finishes.: