Solution ID

59512

Resolution

All Senior Swing models are heavy duty operators and have the Push-N-Go (PNG) feature.  This feature is a programmable function in the control module.

 The PNG settings are: Off, On, or FD (fixed).

  • In the "ON" mode, the "hold open delay time" will be whatever the "hold open delay" is set to.
  • In the "FD" mode, the" hold open delay" will be a fixed at 1 second delay. 

To program the Push-N-Go (PNG) function on the control box.

  1. First activate the program feature by pushing any 2 of the 4 (RED) up/down buttons on the face of the control to enter the programming mode.
  2. Once the display screen is lit,  push the "DOWN" button on the "SETTINGS" side (8 times) until PG is displayed on the "settings" window (actually looks like P6).
  3. Then, on the "VALUE" side, push the "UP" button to change the value from "Of" to "On" , this will activate the Push-N-Go feature.


Notes

Using Push-N-Go on a 2850 / 9550 operator is not the best solution because the master motor door will activate both doors when opened to 5 degrees, but the companion motor door will not activate Push-N-Go at all.  Recommend using 2860 / 9560 operators if double door Push-N-Go is desired.

For more Senior Swing programming information - see installation instructions here.