•If nobody is enrolled-At the “Ready” prompt, enter command mode by pressing “Clear” and then “Enter”.

•If Users are enrolled already- At the “Ready” prompt, enter command mode by pressing “Clear” and then “Enter”. Then type ID number and hit ENTER then place hand.

•At the “Enter Password” prompt, press “4” and then “Enter”

•Press “Yes” at “Add User”.

•Enter any digit ID (up to 10) and then press “Enter”.

•Place your right hand as indicated by the hand diagram and finger LEDs on the top panel.

•Three hand placements will occur to obtain and average that will become your template.

•When added successfully, press “Clear” to exit command mode.