WY falcon keyway

RELATED FAQS

Question
Answer
A PO from a distributor with a letter of authorization from the end user.
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.
The FA3 keyway is the ILCO equivalent to a Falcon Conventional G 6-pin keyway.
The part number is 48-102 C, you will need to specify the cuts.
The profile or shape of the key is different.  This would apply to all key sections with differing names such as F, CE, etc.
Split key systems are delivered in the highest level section on the key tip (insert): L - obverse or classic Y - reverse 0000 - Paracentric ZZZZ - Quad D000 - restricted Everest C000 - open...
The 914KIL-IC trim is shipped with a Small format interchangeable core (SFIC) in a 6 pin "A" section/keyway.  A comparable core from Falcon would be the C646 (uncombinated - no pins) or C...