Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
will old falcon latch work with new falcon case
”
RELATED FAQS
Question
Answer
Will the new Von Duprin 33A/35A center case work on old 33/35 series exit devices?
Resolution:
The new 33A/35A center case will not work with the old 33/35 series exit devices. It is never intended to use parts to convert a device from one Series to another Series as this w...:
Will the old T Series chassis work with the new T latch?
Resolution:
The new latch, introduced mid-June 2013, will NOT fit into the previous T lock chassis. Customer are encouraged to order a new Falcon T lock. If needed, customers can replace the older ...:
Will the new T Series chassis work with the old T latch?
Resolution:
The new chassis, introduced in mid-June 2013, is fully compatible with the previous style latch and the new one launched at the same time.:
What are the part numbers for the new Falcon T latches?
Resolution:
Falcon T Lock Latches No Longer Offered With The T Lock Effective mid June 2013 Old Part Number New Part Number &nb...:
What replaced the D400 series or the D800 series?
Resolution:
Part compatibility (Old vs new): With the exception of the cylinder, most of the parts are neither backward nor forward compatible. This includes the deadbolt. The cylinder mechanism for al...:
Are the M and MA locks compatible?
Resolution:
No parts are compatible between the Falcon MA-Series and the obsolete Falcon M-Series.:
How do I identify the old Falcon T lock chassis versus the new T lock chassis?
Resolution:
The date of manufacture printed on the chassis cover (see below), will determine if you have a revised or old chassis. Chassis manufactured mid-June 2013 will have the new improvements. The first...:
How do I identify the old Falcon T lock latch from the new T lock latch?
Resolution:
For T locks shipping mid-June 2013, the new latch can be identified by viewing the deadlatch profile. The profile of the deadlatch has changed from a "full moon" to a "half-moon". See figure below....: