Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Why is my hollow metal door warping? ”

Resolution: 1 3/4" is the standard door thickness. Steelcraft only makes a nominal 1 3/4" thick door. A 1 3/8" was made for light duty commercial applications but that product was discontinued in 1999.:

Can you change 98/9947 WDC device to a 98/9947 hollow metal device?

Resolution: Yes, for Panic devices only by ordering the top rod kit part #050574, bottom rod kit part #050575, and screw pack #090061. Fire Rated devices can NOT be converted and would require a compl...:

Can wood doors be used with with double egress frames?

Resolution: Yes, wood doors can be used and installed in most hollow metal frame applications including FE-Series and DE-Series Double Egress frames. Caution - For fire rated applications the wood door manufa...:

What is thermal bow?

Resolution: Thermal Bow is a temporary condition which occurs in metal doors mainly due to the temperature differential from one side of the door to the other. This may occur in exterior doors when direct sun ...:

Steelcraft field paint instructions

Resolution: Steelcraft frames and doors are furnished with a high grade, low gloss, baked-on prime paint that provides the best possible protection against corrosion, abrasion and weather, and is an excellent ...:

What is the 022558-000-70?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. DISCONTINUED: The Falcon T lock had a reinforcement kit for a 1 3/4" thick hollow metal do...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Why is my hollow metal door warping? ”

RELATED FAQS