Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ who makes monarch ”

Resolution: Templates for current 718 series trim can also be found on Falcon website:

Can the Von Duprin RX Switch be installed on an existing Falcon Monarch 19?

Resolution: The devices baseplates/scissor assemblies are different and will not accept the Von Duprin RX switch.:

Is the Athena trim from Falcon Monarch the same as Standard trim?

Resolution: Yes, "Standard" was the old name for the sectional pull trim for the 18/XX devices and is now called Athena. The trim is the same, only a name change.:

What is the dogging hex key size on the Falcon Monarch devices?

Resolution: The hex dogging key size for all Falcon-Monarch exit devices is 7/32".:

Has the Monarch 19 ever had electric latch retraction?

Resolution: Electric Latch Retraction(ELR) option for the 19 Series was discontinued in December of 2006.:

What would the 904H stand for on a Falcon Monarch exit device?

Resolution: The "904H" is a UL Panic label that is placed on the centercase of the Falcon/Monarch Panic device.:

Does Schlage offer a rabbetted latch and strike kit?

Resolution: Schlage does offer rabbetted latch and strike kit: Part number, 39-030, for cylindrical locks and deadbolts. Part number, 10-075, for the L9000 mortise locks. Monarch does not offer rabbette...:

What is the standard FSIC mortise housing with a straight cam?

Resolution: 20-059 is the standard straight cam FSIC housing only used with Von Duprin, Monarch, and other straight cam applications. 30-032 is the straight cam FSIC housing only for the outside of the Schl...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ who makes monarch ”

RELATED FAQS