Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ where are hollow metal installation ”

RELATED FAQS

Resolution: ASTM E-119 is a test standard for walls, partitions and floor or roof systems: This test standard is also used for ceramic type glasses when used as window wall and/or borrowed light frames.As...:

Can wood doors be used with with double egress frames?

Resolution: Yes, wood doors can be used and installed in most hollow metal frame applications including FE-Series and DE-Series Double Egress frames. Caution - For fire rated applications the wood door manufa...:

What is the 022558-000-70?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. DISCONTINUED: The Falcon T lock had a reinforcement kit for a 1 3/4" thick hollow metal do...:

What are the installation tolerances for hollow metal frames?

Resolution: Industry standards for hollow metal frames installation tolerances have been developed by both the SDI (Steel Door Institute) and HMMA (Hollow Metal Manufacturers). Both standards are based on th...:

Does Steelcraft have frame installation instructions?

Resolution: It is always recommended to point installers to the industry installation manuals which are very comprehensive and are ANSI documentsClick here to get the updated link to the Steelcraft Shop M...:

Why do frames rust out fast?

Resolution: Excessive premature frame rusting is caused by improper jobsite installation practices and most likely caused by the following circumstances: :

Hollow Metal price estimates

Resolution: Pricing information is not a part of the Knowledge Center data. For all hollow metal price comparisons please e-mail the Steelcraft Estimating Team. For your reference, the e-mail address...:

What do you do if rust spots show up on steel doors and frame material?

Resolution: During the construction cycle, spot rust is usually attributed to either material handling damage or improper storage of the material on the jobsite. The material must be repaired and repainted as ...:

Can "toed in" or "toed out" jambs be adjusted?

Resolution: This condition (toed in or toed out jambs) is usually not found until the door is installed.Frames which have toed in or toed out jambs have been installed out of tolerance.It is the responsibility...:

Steelcraft field paint instructions

Resolution: Steelcraft frames and doors are furnished with a high grade, low gloss, baked-on prime paint that provides the best possible protection against corrosion, abrasion and weather, and is an excellent ...:

What is thermal bow?

Resolution: Thermal Bow is a temporary condition which occurs in metal doors mainly due to the temperature differential from one side of the door to the other. This may occur in exterior doors when direct sun ...:

Can Steelcraft make a 12 gage hollow metal mullion?

Resolution: Steelcraft does not manufacture 12 gage closed section mullions. The maximum is 14 gauge. Steelcraft can provide the outer perimeter (open sections only) of a transom frame in 12 gage material. ...: