Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ where are exit devices required ”

RELATED FAQS

Resolution: The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...:

Where are hardware templates?

Resolution: All the templates can be found at us.allegion.com Please click here :

Where are the part manuals for Falcon exits?

Resolution: Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the :

Is the AD CO with a 993 chassis compatible with the Von Duprin 33A exit device?

Resolution: No, the 33A is not compatible with the AD and CO 993 chassis units. The 33A can only be driven in a clockwise direction. This would restrict it to right hand installs only.:

How do you route the wires for an E996L trim through the exit device?

Resolution: The wires run through the device out to the EPT. See step 7 on page 5 of E996L instructions.:

Can a 55 or 88 series device have a request to exit switch?

Resolution: The Request for Exit (RX) is available on the 55 and 88 Series Von Duprin devices.The RX switch is installed in the end case of 55 and 88 series exit devices.There is no kit to field install the RX...:

Does Von Duprin have a repair department?

Resolution: Von Duprin and Falcon do not offer repair services for any of its exit devices.: