Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What trim may be used with Chexit devices? ”

Resolution: The Von Duprin CX 98/99-4 feet Rim devices on single doors with 5/8" stops and the standard 299 roller strike can be field sized to fit a minimum of 40.2" door opening. This an...:

Why is the electric E996L-FSE trim used with a Chexit CX99 exit device?

Resolution: The E996L-FSE trim is needed if the application requires fail-secure operation from the trim side of the opening. When power is out on Chexit device, E996L-FSE trim will remain locked to ...:

Can the Chexit 98/99 be used with the E996 lever trim?

Resolution: You can use the E996L electric trim with Chexit 98/99 series exit device.:

Will the door unlock if a Von Duprin CX 98 / 99 Chexit device is deactivated with card reader and has a 996LBE trim?

Resolution: When a CX99L-BE is not armed the exterior 996L BE lever trim will be free to retract the CX latch for entrance. When the CX99-L BE is armed the exterior 996L BE lever will not move and...:

How does the outside trim function on a Chexit Rim or Vertical Rod device?

Resolution: A thumbpiece, knob or lever trim left in the unlock position would be locked when the Chexit is armed and unlock when the Chexit device is disarmed. To keep the outside trim in the lock p...:

What are the amperage and power supply requirements for the Von Duprin Chexit (CX) devices?

Resolution: Chexit motor driven devices shipped after 8-24-2015:You can use 1 Chexit device with PS902, 3 Chexit devices with PS904, and 4 Chexit devices with PS914 or PS906 power supplies with proper gau...:

Does Von Duprin offer an exit device for exterior use?

Resolution: Most Panic devices are not designed for exterior applications. As with any mechanical device, exposure to the elements may affect the operation and life of the device and/or finish an...:

What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?

Resolution: :

What gauge wire is needed for CX red and black power wires?

Resolution: For Product Shipped prior to 8-24-2015 with solenoid and EPT or Door Loops: a. 0-100 ft, use #14 Gauge Wire ...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What trim may be used with Chexit devices? ”

RELATED FAQS