Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what standard do Combination Locks fall under ”

Resolution: See image, ANSI A115.1 Mortise Lock Prep This door prep requires the N escutcheon with the L283-029 spacer kit to keep the springcage from falling into the door.&nbs...:

What is the standard backset on a Falcon B lock?

Resolution: The standard backset for the Falcon B Series is 2-3/4". A 2-3/8" backset is also available if specified.:

How do you order the L series lock with an ADA thumbturn?

Resolution: Effective December 9, 2019, Schlage L Series mortise locks with a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing design w...:

What can be ordered if a no lip strike is required for the L9000?

Resolution: The L-Series standard strike is the 10-072 and the available lip lengths are listed below. 7/8" (Flat or straight lip) See picture below.1"1 3/16" (Standard for 1 3/4" doo...:

Will the AL lock fit a 2" thick door standard?

Resolution: The AL series lock fits up to 1 7/8” door thickness out of box.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what standard do Combination Locks fall under ”

RELATED FAQS