Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
what parts are extended for an ND lock extended outside
”
RELATED FAQS
Question
Answer
What are the new announced ND-Series features?
Resolution:
NOTE: ND locks manufactured on or after January 30, 2017 will no longer make use of the soft durometer spacer. The improved spring cage and matching lever eliminates the need for this spacer. ...:
When ordering the ND lock less cylinder will it come with a tailpiece?
Resolution:
The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.:
How to convert a ND series lock cylinder format from PD to BD?
Resolution:
On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...:
What is the standard backset for the ND locks?
Resolution:
The default backset is 2 3/4" and the latch faceplate dimensions are 1 1/8" x 2 1/4". The latch supplied is the 13-047 deadlatch and 13-048 springlatch.:
What is the part number for the full size core driver for the ND series?
Resolution:
The ND-Series FSIC driver is part number N523-127.:
How do I order an ND lock less trim on one side?
Resolution:
It is not possible to mount a cylindrical lock less trim one side, however you can order the lock less components (like lever or rose). If the customer is looking to mount the lever less trim, t...:
Is there a part number for extension rods for 1690/1990 devices?
Resolution:
From 9' to 10' use part # 4270100197 extension rod kit. :
What are the part numbers for the ND lock spring cages?
Resolution:
ND-series locks manufactured before January 30, 2017 used the following spring cages::
What replaced the old D series lever locks?
Resolution:
The old D series lever lock was replaced by the ND lock in September 2003.:
Will a Medeco key-in-lever cylinder fit into an ND lock?
Resolution:
Medeco does offer a key-in-lever cylinder to fit the Schlage ND. You will need to contact Medeco for the cylinder Specify a key-in-lever cylinder to fit the Schlage ND lo...:
How to install an L9000 mortise lock less outside rose trim?
Resolution:
The L283-150 is a modified mounting plate to allow a user to only install trim on the inside of the L9000. For installation and door prep requirements, see the install sheet. Add...:
What is the part number for a Schlage FSIC lever on an ND lock?
Resolution:
On ND Series locks manufactuered prior to January 30, 2017:The ND FSIC lever part number was 03-032. :
Does Schlage or Falcon manufacture a stainless steel cylindrical or mortise lock?
Resolution:
Schlage does not have a stainless steel/non-ferrous lock series. The only option that Allegion provides is the Grade 1 cylindrical Falcon X-Series. To order the Falcon X with the stainless st...:
How can I tell if I have a new ND lock or the previous design?
Resolution:
ND locks shipping on or after January 30, 2017 will look very similar when assembled to their predecessor that shipped prior to that date. There are several ways to distinguish the old versus the n...:
What is the part number for the outside trim assembly on L9000 mortise locks?
Resolution:
Outside Knob/Lever and Rose/Escutcheon Assemblies Part Number Description A Rose with Knob/Lever 09-506 Designs: 01 02 03 05 06 07 12 17 18 OME 41 42 09-655 Des...:
What parts are needed to convert JD to BD on an ND lock?
Resolution:
For ND Locks shipping prior to January 30, 2017:The springcage(s), lever, and core driver will need to be changed. Depending on the function the components below are required.Outside spring c...:
Which electric strike do I use for cylindrical locks used in a single door?
Resolution:
The 6211 would be the most common electric strike to be used with cylindrical locks on a single door application. Check the template to confirm compatibility with specific cylindrical lock model n...:
Can an ND lock with SFIC cores be extended to fit a 3" extended outside door?
Resolution:
ND locks can be extended up to 6" Extended Outside. :
What is the part number for a key in lever tailpiece for the ND lock?
Resolution:
For modular designs: All functions except ND85 the tailpiece part number is N523-022. The ND85 tailpiece part number is N523-123. For non-modular designs: All functions except ND85 the t...:
What is the cylinder part number for an ND-Series lock?
Resolution:
ND-Series Cylinder Reference Table Function Door Thickness Cylinder Mechanism Complete Cylinder Non-Hotel Functions Standard Conventional 23-065 Primus 20-765 Pri...:
How is the Schlage ND lock installed?
Resolution:
Select the appropriate installation instructions below for step-by-step guidance on how to install a Schlage ND lock. ND-Series Installation Instructions (locks manufactured after 01-31-2017)N...:
What parts are modified when ordering an ND extended lock?
Resolution:
Only the chassis components are modified for thicker door applications, the lever and spindle assemblies remain intact. The following parts may be modified depending on the function of the lock ...:
What are the part numbers for the inside and outside knobs for the L series?
Resolution:
Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish:
What are the part numbers for the SFIC driver and spacer used on the ND series locks?
Resolution:
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer:
What is this plastic clip on the ND chassis?
Resolution:
On August 15, 2012 Schlage began shipping ND-Series locks with a hassle free "clip" to aid with the installation of the anti-rotation plate. This feature has been added to the hub to keep the...:
How long is the ND tailpiece for a thick door?
Resolution:
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock ...:
What is the part number for the ND solenoid?
Resolution:
The new motor driven ND electrified locks shipped after March 14, 2016 do not require a solenoid. The Schlage ND-Series electrified locks shipped prior to March 14, 2016 would have used a...:
Does the ND lock have an RX option?
Resolution:
The ND lock is available with an RX option:When ordering a complete ND lock specify RX when the request to exit (RX) switch is required.The ND80EL, ND80EU, ND96EL, ND96EU, ND12EL, ND12EU electrifie...:
How do I order a lock for a non-standard or thick door?
Resolution:
Most locks will have a standard door range they will install on, but occasionally customers will want to use them on thicker doors. In order to do so, the extended door thick...:
Why can't I remove the control key from the core after the core is inserted into the lever?
Resolution:
The lever may be missing the slot feature for the core locking lug. Verify slot is in place.:
Does the backset extension link work with a 2 3/8" latch or a 2 3/4" latch?
Resolution:
A and AL product: Must use the 2 3/8" backset with the 41-005 extension link D Knob and ND product: Must use the 2 3/4" backset with the 43-005 extension link:
What other locks can the blue lever removal tool 24002693 be used with?
Resolution:
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project. This tool can be used for Schlage ND-Series ...:
How do you order the ND series lock with a small format core?
Resolution:
The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core: