Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What locks do we specify for shaft doors ”

RELATED FAQS

Question
Answer
Are Schlage AL series products handed?
The AL series product line does not use any parts that requires prior knowledge of the door handing.  
Is deadbolt monitoring available on the L9000?
As of February 2016, some Schlage electrified locksets can be ordered with deadbolt monitoring.  To order deadbolt monitoring with an L series lockset specify DM in the option field....
How to order an extended D knob series lock?
Specify how the door is extended and the door thickness. Example 3" EE    Pricebook availability:    Extended Equally (EE)- Over 2"- 6" Extended Insid...
What parts do I need to convert my AL lock to fit a 2" thick door?
The easiest method to obtain an AL lock for a 2" door is to specify a 2" thick door when ordering.  
Part required by function:2 each A700-043 driver & A700-034** lever insert in addition to the chassis parts below:AL10S – 2 hubs A700-028AL25D – 2 hubs 1 A700-028 (inside), 1 A700-030 (outside)...
What parts are needed to install a T lock on a 1 3/8" door?
If the lock has not been ordered then specify a door thickness of 1 3/8" and a shim kit will be provided to allow installation on a thin door. If the lock has already been ordered then order ...
Can the LM9000 multi lock series be used in standard openings?
On May 1, 2013 the LM9000 lock was discontinued and replaced with the LM9300 Multipoint Lock. 
The Schlage LM9000 series lock was originally designed for use in FEMA (tornado) storm shelter openings and/or Florida Building code (hurricane) assemblies.  Doors, frames and hardware can be order...
  Specify either an L or B doors for use with the LM9000 or LMV9000 Specify the F frame for use with the LM9000 or LMV9000 Order the lock from Schlage as you would normally The concealed rods...