Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ WHAT IS STANDARD LIP LENGTH ”

RELATED FAQS

Question
Answer
Is there a flat lip option for the ND series?
There are two flat lip strike options: Specify XQ02-309 for a 10-013 strike - specify 7/8" Specify XQ07-351 for a 10-025 strike - specify 7/8"
How do I calculate lip length?
Lip length refers to the dimension from the centerline of the strike screw holes to the edge of the lip.  See the attached as lip length depends on door handing and thickness, Extended Lip Str...
What length SRT screw is used for mounting the body of a 1461 closer?
The SRT screw that is used for mounting the 1461 closer body is 1 3/8" long.Four screws are used to mount the closer body.
What is the minimum stile dimension on the A14-Series door?
The minimum stile and rail dimensions with glass trim are as follow: Top Rail: 6 1/4" top of door to exposed glass or 5 1/2" top of door to cutout Center Rail: 6 1/2" exposed gla...
How is the 100 series from Glynn Johnson different from the 100 ADJ series?
The basic units are similar.  The ADJ has a 12" long track that is mounted in the frame to allow the degree of opening to be selected in the field anywhere from 85 to 110 degrees, where the standar...
What can be ordered if a no lip strike is required for the L9000?
The L-Series standard strike is the 10-072 and the available lip lengths are listed below.  7/8"  (Flat or straight lip) 1" 1 3/16" (Standard for 1 3/4" doors)  1 1/2" 1 3/4" 2" over 2" up...