Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
what is part number for sfic control key for cb keyway
”
RELATED FAQS
Question
Answer
Will Schlage make a cylinder in another vendors keyway?
Resolution:
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...:
What is the part number for a cut emergency key in a C keyway?
Resolution:
The part number is 48-102 C, you will need to specify the cuts.:
What is the part number for a full size interchangeable core control key?
Resolution:
Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...:
What is the part number for a full size construction control key?
Resolution:
The Schlage full size construction control key part number is 48-056-ICX. The ICX suffix will change depending on if the key is for a new job or existing job. New jobs: Specify "ICX" E...:
What is the part number for the SFIC tail piece for a W lock?
Resolution:
Q330-168 SFIC Tailpiece (throw member for levers) Q330-169 SFIC Tailpiece (throw member for knobs) :
What are the part numbers for the ND lock spring cages?
Resolution:
ND-series locks manufactured before January 30, 2017 used the following spring cages::
What is the part number for the SFIC driver on the AL locks?
Resolution:
The small format core throw member for the AL locks is C604-381.:
Will Falcon B locks prepped for BD accept a 6 or 7 pin core?
Resolution:
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core). The tailpiece shown below is used for bo...:
What is the part number for the SFIC rim cylinder driver?
Resolution:
The Schlage SFIC rim cylinder driver is part number B520-365, shown below. Figure 1: SFIC Rim Cylinder Housing:
What are the part numbers for the SFIC driver and spacer used on the ND series locks?
Resolution:
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer:
What is the part number for the AL SFIC spacers?
Resolution:
The part number for one spacer is D500-000.:
What is the part number for an Everest key blank?
Resolution:
Part numbers listed below: :
ND keycam part numbers.
Resolution:
See here for standard ND Keycam part numbers and what functions they belong to. See here for special ND Keycam part numbers and what functions they belong to. ...:
What is the part number for the 99 hex dogging key?
Resolution:
Part Number 090085 is a package of 10 of the 227 dogging keys.:
What is the dogging hex key size on the Falcon Monarch devices?
Resolution:
The hex dogging key size for all Falcon-Monarch exit devices is 7/32".:
What is the part number for the spindle for a 373L control?
Resolution:
Part number for the 373L spindle is #967480-89:
What is the part number for the Senior Swing control box?
Resolution:
The Senior Swing Series changed to the "Digital" control box in Sept. of 2006.:
What is the part number for a control pin for a 23-030?
Resolution:
There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:
How are the solenoid air valves in the 7900 series control boxes marked?
Resolution:
The part number for the solenoid air valve in the 7900 Series control boxes are: 7901/ES7901 - part# 941 - marked A 7902(S)/ES7902(S) - part# 942 - (2 valves) marked A and B 7949/ES7949 - part...:
What is the part number for the Falcon 8200 (8230/8240) series operator control box?
Resolution:
The Falcon 8200 Series control box can be ordered as either an 8230-3462 or an 8240-3462. They are the same part.:
What part is required to add a sequencing feature to a 7902/7982 control box?
Resolution:
The sequence card part number is 3426 and plugs in the "S" slot of a control boxes right next to the 10 pin terminal strip. The 7902/7902ES or 7982/7982ES can be converted to a 7902S/7902SES or 79...:
Is there a cylinder that can trap a key?
Resolution:
This product was available until 2001 when it was discontinued. Part Number Description XB09-728 Entrapment mortise cylinder, P keyway XB09-834 Entrapment rim cylinder, P keyway ...:
Does Schlage offer restricted SFIC keyways?
Resolution:
Schlage Everest B keyways are restricted SFIC keyways.:
Is a standard cylinder keyway such as "C" available in SFIC?
Resolution:
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...:
What cylinder and cam is used with the 650 series keyswitch?
Resolution:
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions. Blocking RingSpecify Dimension 1//8" 012 3/16"&nb...:
Can the Schlage L or LP section key blank be cut in the field?
Resolution:
Schlage does not recommend cutting the L or LP section key blanks in the field. Below are some details.Non Primus:In the classic family of keyways the "L" key section is the highest level key...:
I have an ILCO key what is the Schlage equivalent?
Resolution:
The table below provides the Ilco cross reference to the Schlage keys. Ilco IdentificationSectionPinsSchlage Part #SC1C535-100 CSC4C635-101 CSC6 waferN/ASC7F535-100 FSC8E5...:
What is the size of the current Von Duprin dogging key?
Resolution:
All Von Duprin exit devices (22, 33/35A ,55 ,88 ,95 and 98/99) use 5/32" dogging key. There are two part numbers available: 090005 is the package of 2 and 090085 is the package of 10.:
What is the part number for a privacy emergency key?
Resolution:
M504-271 is the emergency key used to open a locked S40.: