Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what is nomial clear width ”

Resolution: The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projectin...:

What is clear opening width?

Resolution: Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb. &nbs...:

Can DE-Series frames be prepared for pocket pivot hinges?

Resolution: Pocket pivot hinges are mainly used in cross corridor applications where clear opening width is a factor. For frames, pocket pivot hinges are a special hinge options which must be spe...:

What is the difference between the FE and DE-Series frames

Resolution: A Double Egress frame is a double door frame prepared to receive two single-acting doors swinging in opposite directions (both doors are) the same hand. These openings are installed in cross corrid...:

What options are available on the CE-Series doors?

Resolution: CE Series door in a variety of embossed panel designs and gages. The CE series embossed panel doors also offer a wide range of specifiable options including sizes, and hardware prepar...:

What are the dimensions of the 5654 or 5754 mullion?

Resolution: 1-1/8" at door face, 2-3/8" at widest point, 3-1/2" depth, with 1/8" thick walls.:

What is the narrowest door a 99 rim, single door can fit on?

Resolution: The Minimum single door opening should be 26.32" and use the 299 or 499F strike.:

Can a Senior Swing 9550 be mounted on an unequal pair of doors?

Resolution: "PUSH SIDE" application: Minimum 52" wide pair, with neither door being less than 21" wide. "PULL SIDE" application - For Product Shipped...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what is nomial clear width ”

RELATED FAQS