what is double rabbet

RELATED FAQS

Question
Answer
Frame with a recess or offset formed on both sides of a stop to receive a door
Hospital Stops are located at the bottom of the frame jambs and/or mullions. The integral door stops are terminates above floor line and is closed with a 45° or 90° angle to facilitate cleaning at ...
Communicating Frames are hollow metal frame fabricated such that a door is installed in each rabbet of a double rabbeted frame (2 doors total) to facilitate dual access and control of the opening, ...
Cased Open, Single Rabbeted, Double Rabbet, Unequal Rabbet, Equal Rabbet, Double Egress
Steelcraft offer a 12 gage F-Series frame. Basic product offering: Door opening size: Single Door = 4´-0" x 8´-0" Double Door = 8´-0" x 8´-0" Double rabbet only. Single rabbet is not ...
Lead lined frames are intended for use in the X-ray Room locations in Health Care facilities. Frames are provided by Steelcraft prepped as follows:  Frames are supplied knock-down (KD). Fram...
Yes. 1 7/16" thick glass but a special rabbet size is required. The size of rabbet required for the frames would depend on the size of the glazing bead being used. For 1" wide glazing stops, ...
Recess or offset formed in the face to receive a door
Rabbet, frame feature; Frame Profile?
Fire labels (UL, ITS/WHI or FM) are located as follows: Butt Hinges and Pivots: On the doors the fire label is located on the hinge edge between the top and 2nd hinge preparation. On the fram...