what is an RPA# for Falcon restricted material?

RELATED FAQS

Question
Answer
The castlenut wrench material was changed from steel to a very strong polymer.  The new part number is 40-017.
Falcon Standard Bitting Specs - 018 system Falcon Restricted Bitting Specs - 025 system
A PO from a distributor with a letter of authorization from the end user.
Part number 80-037 is the combinated Schlage Everest small format interchangeable core and is available in the restricted Everest B Family keyways. Part number 80-036 is an uncombinated version.
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core).  The tailpiece shown below is used for both...
A purchase order must by entered through Order Entry.Part number 50-123 for Schlage and 50-123F for Falcon.  Reference the structure number (preferred) or an order number for existing mas...
Devices built After 2/28/2011: Use a 1 1/8" - 1 1/4" mortise cylinder with straight narrow cam. (Cam profile same as the Schlage B520-731, see table below for part numbers) Devices built Befo...
 Modular 1-1/8"  Modular 1-1/4"  SFIC and FSIC  Non-Modular Non-IC Conventional  Non-Modular Non-IC Everest Primus  B520-730  B520-731  B520-2...
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders.  Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces