Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what ic core is used for nd locks ”

Resolution: The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.:

What parts are needed to convert JD to BD on an ND lock?

Resolution: For ND Locks shipping prior to January 30, 2017:The springcage(s), lever, and core driver will need to be changed. Depending on the function the components below are required.Outside spring c...:

What is the part number for a control pin for a 23-030?

Resolution: There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:

How can you tell the difference between the FSIC and SFIC cores?

Resolution: There are several ways to spot differences, see Figure 1, but the easiest is to look at the face of each core. The face of both cores looks like a "figure 8". With small format, bo...:

Will the SFIC mortise housing accept both six and seven pin cores?

Resolution: Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what ic core is used for nd locks ”

RELATED FAQS