Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what cylinder length for schlage mortise sectional trim ”

Resolution: Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blo...:

What cylinder is used for the Falcon 510L and 510L-NL trim?

Resolution: The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the ...:

What cylinder is required for the 360L from Von Duprin?

Resolution: A 1 1/4" mortise cylinder with straight cam (similar to the Schlage B502-191) or a 1 1/2" mortise cylinder with straight cam using supplied spacer collar. Cylinder length does not chan...:

What cylinder does the 512 TP NL use?

Resolution: A 1-1/8 through 1-1/2" mortise cylinder with straight cam per Step 4 of 512NL Instructions.:

Mortise cylinder with switch.

Resolution: The XB09-195, XB09-795, and XQ11-804 are basically modified mortise cylinders. The overall length of the mortise cylinder switch is approximately 1-9/16" (1.563"). The diameter of the cylinder face...:

What non IC cam is offered by Schlage to work in a Falcon MA lock?

Resolution: Price Book 72A List Price $8.10:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what cylinder length for schlage mortise sectional trim ”

RELATED FAQS