Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
what cylinder is used for an escutcheon trim
”
RELATED FAQS
Question
Answer
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Resolution:
Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blo...:
Do we make a blank trim plate to replace an existing trim?
Resolution:
We have several blank trims listed in the price book to cover existing trim prep in door. DEVICE EO TRIM 22 230EO 88 880EO 98/99 990EO or 996EO* 33A/35A Rim, 33/3...:
Can you use a new 812L on an old bar that had a 182L?
Resolution:
The current 812L trim will replace the older 182L trim. Due to the thicker escutcheon plate of the 812L trim a 1 1/2" mortise cylinder with straight cam for mortise devices or a longer rim cylinde...:
Why is the L0170 not available in the L escutcheon design?
Resolution:
The Schlage L0170 is not available with the L escutcheon design because due to the narrow size you cannot fit the mounting plate underneath. The mounting plate must sit on a "diamon...:
What is the ANSI A115.1 Government 86 Door Prep for the L9000 lock?
Resolution:
See image, ANSI A115.1 Mortise Lock Prep This door prep requires the N escutcheon with the L283-029 spacer kit to keep the springcage from falling into the door.&nbs...:
What is the part number for the blank escutcheon trim that matches the 996L escutcheon?
Resolution:
The 996EO trim is just the plate without the lever and cylinder hole: