what can be done about oil-rubbed pull handle?

RELATED FAQS

Question
Answer
Warranty Statement3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty - Additional warranties listed below The provisions of these limited warranties do not apply to P...
Cleaning and caring for the lock will vary depending on the finish. Clear-coated or oil rubbed finishes can be cleaned periodically with a mild non-abrasive soap and buffed lightly with a clean ...
The finishes below are available on the L9000, some lever designs and trims are not available in all finishes.  605  Bright Brass  606  Satin Brass  609 &...
The 643e is a powder coat finish equivalent to the US11 aged bronze finish.  The 613 is oxidized and oil rubbed and is equivalent to the US10B.
Close up of the copper relieved edges on 643e
The 4040(XP) door closer can be used as a temporary replacement in a 4630/4640 operator to provide manual control of the door while the 4630/4640 closer cylinder is being repaired or a replacement ...