Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What are Through Bolts ”

RELATED FAQS

Resolution: The 296G is is not a model number but rather the UL listing number. This listing would be on many Ives Flush Bolts including; FB30 and FB40 series Automatic Flush Bolts FB50 and FB60 ...:

What where the S200 design improvements made in 2008?

Resolution: To update an older (pre-April 7, 2008) S200 lock, you must replace with the following components: Interconnect Assembly (08-000) Deadbolt 2 3/8" or 2 3/4" backset (12-291)...:

What is the mounting hole pattern on the 1260 closer?

Resolution: The 1260 Series closers have a bolt hole (mounting pattern) of 9-1/16" horizontal x 3/4" vertical:

What are the dimensions of the SC70 footprint

Resolution: The measurements from center line to centerline of the mounting holes are 2-3/8" x 6-3/4".:

Are flush bolts available on the inactive leaf of hurricane double doors with either FBC or NOA approvals?

Resolution: Ives SB360 surface bolt at top and bottom are the only flush bolts approved for use on H-Series hurricane FBC or NOA applications? The only approved latching hardware for inactive leaf of pairs w...:

What are the differences in B500, D100, and D200 bolts?

Resolution: The bolts used in these products are similar except for bolt material. B500 and D200 - Zinc bolt D100 - Steel bolt:

Explain the B580 deadbolt function.

Resolution: The B580 "Door Bolt" is a deadbolt that is thrown or retracted by the inside turn unit only. There is no outside trim or keyed cylinder.:

Does Von Duprin offer any pulls that through bolt to the Guard-X device?

Resolution: Von Duprin does not offer any lever trim or pulls that through bolt to the Guard X device. Ives has the 8102-6 and 8105-6 pulls that can be lined up with the mounting screws of the exit device b...: