Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What are cycle tests? ”

RELATED FAQS

Question
Answer
What are cycle testing counts for exit devices?
ANSI grade one cycle test is 500,000, grade two is 250,000 and grade three is 100,000.
How do you test a Falcon 24 or 25 Series EL solenoid?
The resistance readings for a Falcon 24 or 25 Series EL solenoid should read;Green to Yellow = Pull Coil, should measure between 1 and 2 ohms of resistance. Green to Orange = Hold Coil, s...
692 Smart Bar trouble shooting
Verify power input lines have 12 or 24 volts DC. Power up the 692, several self test beeps should occur and the internal relay will cycle then it will become silent In normal operation breaking...
What are ANSI BHMA hardware grades?
The American National Standards Institute (ANSI) and Builders Hardware Manufacturers Association (BHMA) have developed durability, strength and performance standards for every type of door hardware...
What would cause my 4600 (4630/4640) Series operator to keep trying to open and squeal after opening to 90 degrees?
       "Opening Force" adjustment could be set to strong (high).  This adjustment is a turn pot adjustment which can be found on the controller.  Try adjusti...