Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
warranty for power transfer
”
RELATED FAQS
Question
Answer
What is the warranty on a Schlage power supply?
Resolution:
The warranty on the PS900 Schlage Electronics Power Supplies is 36 months (3 years) from date of manufacture. The warranty is only valid for a true manufacturing defect in the power supply. Any cus...:
Do we have a maximum door width or height for using pivots?
Resolution:
The maximum door width that pivots have been tested is a 4' wide door. Any door greater than 4' would shorten the life of the pivots. There is no maximum door height, for offset pivots the ru...:
What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?
Resolution:
:
Are EPT preps available on the Paladin Series door?
Resolution:
EPT power transfer preparations are available on the Paladin PW14-Series door and FP14-Series frame. Electrified hinges are available on the Paladin PW14-Series door&...:
Where is factory recommendation for location of an EPT?
Resolution:
EPT installation guidelines are as follows: Recommended location is 6" below top hinge per template Steelcraft will locate the power transfer prep at the Von Duprin re...:
What is the most common practice for running electric power from a frame to the door and hardware?
Resolution:
Electrical hinges or a power transfer units are the most commonly used practices to run electric power to locks and/or strikes. Electric Hinges: Most electric hinges will fit into...:
Where are hardware templates?
Resolution:
All the templates can be found at us.allegion.com Please click here :
What gauge wire is needed for CX red and black power wires?
Resolution:
For Product Shipped prior to 8-24-2015 with solenoid and EPT or Door Loops: a. 0-100 ft, use #14 Gauge Wire ...:
How do I get service on my Astro Swing operator that isn't working properly?
Resolution:
LCN does not does not have or supply any information for the old (obsolete) "High Energy" Dor-O-Matic Sliding doors, Bi-Fold doors or Astro Swing doors. You MUST be AAADM certified to work on, or g...:
ELECTRICAL POWER TRANSFER
Resolution:
EPT, EPT2, EPT10 (EPT1024, EPT218):
ELECTRIC POWER TRANSFER
Resolution:
EPT, EPT-2, EPT-10 (EPT-1024, EPT-218):