Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin trim parts catalog ”

RELATED FAQS

Resolution: Order E-Trim Mech Kit part #050671-00 which will include a new solenoid already mounted to the blocking mechanism. See installation instruction # 921297 here which will show how to remove block...:

Can you get Avalon lever for 25 series lever trim?

Resolution: See 24 and 25 series trim section in the Price Book.:

What parts of the device and trim for the 98/99 are 643E finish?

Resolution: Device: Pushbar end caps, pushbar trim and center case cover. Trim: Lever assembly, trim plate assembly (trim plate and bushing sleeve).Bronze Finish Comparison:

What is the part number for the 230L stud?

Resolution: The 230L mounting stud is part #971245.:

Will the standard cylinder drive bushing on a 1790 device work with my 179L trim?

Resolution: Step 3 and 4 of 179L Instructions will show the old drive bushing being removed & the new drive bushing getting installed:

Can you use lever trim on a 19V-EO without getting any additional parts?

Resolution: The Exit Only (EO) device will accept any 19 Series trim as the main cam for the trim input is always put on the device center case.:

What is the part number for the Trim Device Cable to connect an E996 or RX996 or E7500 to a Chexit module?

Resolution: The Trim/Device Cable part number is 040193. If a Chexit device is ordered with an E996/RX996/E7500 from the factory, the trim/device cable is automatically furnished at no...:

What is the part number for the Von Duprin E996L solenoid?

Resolution: This solenoid is replaceable. 24V: part number 050671 kit or 050814 (solenoid only) 12V: part number 050898 (solenoid only) :

What is the part number for the lever return spring for an old 182LE trim?

Resolution: These parts are no longer available. For reference the spring part number is 4841 and the clip part number is 4326.:

What is the part number for a mortise thumbturn for rose trim?

Resolution: The thumbturn for rose trim is specified by 09-509 and the Dim, see table below. Dimension Chart: 09-509 Thumbturn Part Number Door Range Dim 09-509 1 3/8" ...:

How to install an L9000 mortise lock less outside rose trim?

Resolution: The L283-150 is a modified mounting plate to allow a user to only install trim on the inside of the L9000. For installation and door prep requirements, see the install sheet. Add...: