Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
von duprin sfic rim cylinder housing body
”
RELATED FAQS
Question
Answer
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
Resolution:
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:
What is the part number for the SFIC rim cylinder driver?
Resolution:
The Schlage SFIC rim cylinder driver is part number B520-365, shown below. Figure 1: SFIC Rim Cylinder Housing:
Does Schlage offer a Rim cylinder FSIC housing less core?
Resolution:
Rim cylinder housing only for SFIC is part number 80-129.:
What is the part number for the Schlage thumbturn rim cylinder?
Resolution:
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:
Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?
Resolution:
The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal (using the tailpiece guide).:
What cylinder and cam is used with the 650 series keyswitch?
Resolution:
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions. Blocking RingSpecify Dimension 1//8" 012 3/16"&nb...:
What is the M504-413 tool used for?
Resolution:
See attachment that describes this tool.:
Driver pins on SFIC mortise housings loosen up and fall out.
Resolution:
Issue: Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...:
Will the SFIC mortise housing accept both six and seven pin cores?
Resolution:
Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.: