The hole should be drilled in the field once the end cap is located on the door. It is a 5/8" hole, that is located 5/16" from the end of the mechanism case. See installation instruction of t...
RX wiring on all L9000 locks with RX switch manufactured after January 2, 2017:The L-Series switched to a handed modular three-wire request to exit (RX) switch. This change was originally completed...
Specific to the RX switch installed into the L9080EL/EU and L9082EL/EU and L9000 mechanical locks prior to January 2, 2017:ALL PART NUMBERS BELOW DISCONTINUEDThe L-Series switched to a three-wire r...
The ND lock is available with an RX option:When ordering a complete ND lock specify RX when the request
to exit (RX) switch is required.The ND80EL, ND80EU, ND96EL, ND96EU, ND12EL, ND12EU electrifie...
The Von Duprin 6000 series electric strike can be converted by ordering the appropriate kits below. Kits include the solenoid, plunger, spring, and washer.
6000 Series solenoid Kit 1...
The Von Duprin E7500 has a total of 8 wires.
Two power wires.
12VDC solenoid has yellow wires.
24VDC solenoid has black wires.
Six switch wires.
Latchbolt monitor switch has three wires,...
Solenoid: Black (2 wires)
RX (monitors both sides)
Normally Open: Green (pin 6 when connector included)
Common: Orange (pin 5 when connector included)
The current version o...