Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ VON DUPRIN RIM CYLINDER REQUIREMENT ”

Resolution: The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:

What is the part number for the Schlage thumbturn rim cylinder?

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?

Resolution: The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal (using the tailpiece guide).:

What type of cylinder does theVon Duprin 373L trim take?

Resolution: All Von Duprin 370 Series trims require a 1 1/4" mortise cylinder with a straight cam.:

If I convert from the Von Duprin 88 K (88 rim with 880K trim) to the 373 L trim is a new back plate required?

Resolution: No, the back plate for 880K-knob trim is the same as for 373L-lever trim. However, since 373L is a narrow style trim, an 889 cover plate is required: part number is “889.finish”:

What cylinder is needed when using the 9975L with 996L-M trim?

Resolution: A 1 1/4" mortise with straight cam similar to the Schlage B502-191 is needed when using Von Duprin 9975 mortise device with 996L-M trim.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ VON DUPRIN RIM CYLINDER REQUIREMENT ”

RELATED FAQS