Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin parts ”

RELATED FAQS

Resolution: Order E-Trim Mech Kit part #050671-00 which will include a new solenoid already mounted to the blocking mechanism. See installation instruction # 921297 here which will show how to remove block...:

Are there any instructions for Von Duprin device maintenance?

Resolution: Please see the Maintenance Kit Manual for information on device lubrication as well as complete breakdowns and parts lists for Von Duprin exit devices.Exit devices and latc...:

What is the part number for the Von Duprin E996L solenoid?

Resolution: This solenoid is replaceable. 24V: part number 050671 kit or 050814 (solenoid only) 12V: part number 050898 (solenoid only) :

Can I add 996LNL to my 99EO?

Resolution: The Von Duprin 98/99EO exit devices will accept any of the exterior trims that we offer for 98/99 exit devices without any extra parts. 996L, 996L-NL, 996L-DT, 996L-BE, 990NL, 990DT, and 110NL a...:

Can the handing be changed on a Von Duprin 373L trim ?

Resolution: Changing the handing on a Von Duprin 373L trim requires following parts: LHR to RHR requires 090092 ( Package of 4 springs ) and 050597 ( back plate assembly ). RHR to LHR requires 090091 ( Pa...:

How do I change the handing on the Von Duprin 373L trim?

Resolution: Changing the handing on a Von Duprin 373L trim requires following parts on all lever designs EXCEPT #12: RHR requires part number 090092-00 (LEVER CONTROL SPRING RHR PKG/4) and 050597-...:

How do you convert the Von Duprin 370 series controls to NL or night latch function?

Resolution: You must have the Von Duprin NL Cylinder plate part number 967484-89 to convert the 370 series controls from classroom function to night latch function. If new installation, use the NL cylinde...:

What is the part number for the blank escutcheon trim that matches the 996L escutcheon?

Resolution: The 996EO trim is just the plate without the lever and cylinder hole:

Repalcement parts for Schlage Electronics 672 TouchBar and 692 SmartBar

Resolution: See attached table: Schlage 692/672 Parts Cross ref:

What is the part number for the "ridged" or "strike" plate on the 299 roller strike?

Resolution: Strike or ridged plate with ridges part number is 970323622.:

Is the E992L solenoid still available?

Resolution: Solenoid for the older E992L is not available even via Engineering as a Special. The E992L trim was discontinued in August 2005 when the E996L trim was introduced. The current E996L solenoid i...: