Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin parts list ”

Resolution: See attached table: Schlage 692/672 Parts Cross ref:

If you order the Von Duprin trim only do you get the screw pack for a 1 3/4" and 2 1/4" door?

Resolution: All Von Duprin 98 and 99 trims include screws for both 1 3/4" and 2 1/4" thick doors.:

Can the Von Duprin EL option be added to any existing 98/99 device?

Resolution: The Von Duprin EL option can be added to any existing 33A/35A, 98/99 series exit devices. :

What is the size of the current Von Duprin dogging key?

Resolution: All Von Duprin exit devices (22, 33/35A ,55 ,88 ,95 and 98/99) use 5/32" dogging key. There are two part numbers available: 090005 is the package of 2 and 090085 is the package of 10.:

What is the part number for the Von Duprin 98/9947 ratchet release assembly?

Resolution: Part # 106222:

What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?

Resolution: The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.:

How should a Von Duprin exit device be written out for ordering?

Resolution: To order Von Duprin exit devices, reference the "How to order" section in the Von Duprin catalogs. All Von Duprin device series Catalogs are available on website. Choose "Cata...:

How do I change the handing on my 7500 mortise lock?

Resolution: You can reference the 7500 mortise lock rehanding instructions. Remove the two screws from mortise lock faceplate. Remove the face plate and the collar from the mortise lock then rotate the la...:

Does the Inpact EL94/95 have the same solenoid as the EL devices?

Resolution: As of 1/16/2013, the 113189-00 EL INPACT SOLENOID/PLUNGER ASSY is no longer available.:

Did the 996L trim replace the old 992L and 994L trims?

Resolution: Additional information: The 996L looks like the 992L The 996L replaced both the 994L and 992L The internal parts for the 994L and the 996L are exactly the same. The 992L prep was a li...:

Can a Von Duprin 3' pushpad exit device be converted to a 4' device in the field?

Resolution: A 3' exit device cannot be converted to a 4' exit device. You will need to replace the 3' device with a 4'. Conversely, a 4' device cannot be converted to a 3' device. Converting these exit de...:

Is the Von Duprin Chexit part number 050228 a module or a kit?

Resolution: The circuit board is sometimes referred to as a "module" in the field.:

Does the Von Duprin CD kit include the machined cover plate for the cylinder?

Resolution: The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:

How is a bitting list obtained?

Resolution: A purchase order must by entered through Order Entry.Part number 50-123 for Schlage and 50-123F for Falcon. Reference the structure number (preferred) or an order number for existing mas...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin parts list ”

RELATED FAQS