Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin fire exit hardware cross reference ”

RELATED FAQS

Resolution: The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...:

What is the difference between Panic Hardware and Fire Exit Hardware?

Resolution: The most obvious difference (in the device) is the lack of mechanical dogging on a Fire Rated Device. There are some internal parts that may be different and the method it is secured to the d...:

What Von Duprin solenoid crosses over to the solenoid part number 971687?

Resolution: If you are trying to replace Von Duprin EL solenoid part number 971687, the sellable part number for the solenoid and plunger is 050535. Please note that the solenoid is rarely the cause of E...:

Is the Von Duprin 1609 strike fire rated for pairs of doors?

Resolution: The Von Duprin 1609 cannot be used on a pair of fire rated doors. We recommend using the Von Duprin fire rated mortise exit device in lieu of the rim device such as the Von Duprin 5575-F,...:

What LCN closer is comparable to the Norton 7500?

Resolution: The Falcon SC71 is an exact replacement for the Norton 7500. The LCN 1460 or 4040 Series closers could be used, the mounting hole pattern is different.:

Where is the cross reference list for PS800 to PS900 series power supplies?

Resolution: Von Duprin PS914-4RL power supply replaces the PS873-4TD.:

Repalcement parts for Schlage Electronics 672 TouchBar and 692 SmartBar

Resolution: See attached table: Schlage 692/672 Parts Cross ref:

Is the Von Duprin Guard-X exit device fire rated?

Resolution: The Von Duprin Guard-X exit device is not fire rated because the deadbolt is not spring loaded. Therefore, there would be no positive latching as required on a fire rated opening. :