Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ VON DUPRIN EXIT DEVICE TRIM FINISH ”

RELATED FAQS

Question
Answer
Why doesn't full rotation of the AD or CO Series Exit Trim (993) outside lever fully retract the Von Duprin 98/99 Exit Device latch?
- AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device.  Be sure this screw is installed- Exit hardware and strike must be properly mounted ...
What is the difference between the 376T and the 360T trim when it is used with Von Duprin 33/3547A exit device?
The 376T trim activates and connects to the 33/3547A top rod. The 360T activate and mounts to the 33/3547A center case.
Can danmark lever designs be used on Von Duprin Exit Device trims?
Von Duprin does not offer any of the danmark lever designs by Schlage.
Can I use an AD or CO - 993 Exit Trim with a Von Duprin 98/99 Concealed Vertical Rod exit device on a wood door?
The AD or CO - 993 is NOT compatible with a Von Duprin 98/99 Concealed Vertical Rod exit device on wood doors.
What parts of the device and trim for the 98/99 are 643E finish?
Device: Pushbar end caps, pushbar trim and center case cover. Trim: Lever assembly, trim plate assembly (trim plate and bushing sleeve).Bronze Finish Comparison
What are Frascio levers?
Frascio is a company that provides decorative lever sets for many of Allegion products.  More information can be found on their web site at WWW.frasciointernational.com.
Why would the 996L trim not lock or unlock when installed with 98 or 99EO?
The 98/99 rim and vertical rod exit devices are shipped with NL drive screw to function as a Night Latch. To convert the device to Class Room, remove the NL Drive Screw on 98/99 center case ass...
Is the Von Duprin 88 exit device available in 609 Antique Bronze finish?
No, the Von Duprin 88 is available in US3, US4, US10, US10B, US26, and US26D finishes.  It is also available in US3A, US4A, US15, 643e, and sprayed glossy black (SPBLK).  
Does Von Duprin offer the 88 exit device in US5 finish?
No, Von Duprin does not offer the 88 or 55 exit device in US5 finish.  
Why does my Trilogy Lock not retract the latch when I replace a lever trim on a 98/99 series device?
If the NL screw on the 99 device has been removed the Trilogy lock will not retract the latch.
What finishes should be used on exit devices near the ocean or in saltwater environments?
Von Duprin Exit Devices (33A/35A, 98/99, etc) are handled on a case by case basis regarding their ability to handle salt and chemical environments. Our powder coated finishes US28 (Anodized Alum...
What cylinder is used in a 210K trim for the 22 series exit device?
Equivalent to the Schlage D series line with a C keyway. Part number 21-002.
What replaced the Von Duprin 372L trim?
The Von Duprin 372L & 370L/BE series trims are discontinued and there are no replacement for them.  The new 33A/35A series exit devices use 360L trim. 370/BE trims were used with old style 33/35...
Hardware finish warranty
Please contact the Allegion Product Support Team on all questions or inquiries pertaining to hardware finishes warranties. Please send an e-mail to the applicable Product Support team:Closers_TechP...
Do we offer a lever trim with squared top and bottom for the 98/99 series exit devices?
The Von Duprin 994L series trims were square on top and bottom.  They were discontinued in July 2010.
How do you route the wires for an E996L trim through the exit device?
The wires run through the device out to the EPT. See step 7 on page 5 of E996L instructions.
Where are hardware templates?
All the templates can be found at us.allegion.com   Please click here
Is the Von Duprin 1609 strike fire rated for pairs of doors?
The Von Duprin 1609 cannot be used on a pair of fire rated doors. We recommend using the Von Duprin fire rated mortise exit device in lieu of the rim device such as the Von Duprin 5575-F,...
What is the Von Duprin warranty?
Von Duprin warrants that the product manufactured by it and delivered here under will be free of defects in material and workmanship for a period as follows: Exit devices and trim for 36 months...
Does EL conversion kit for Von Duprin exit devices contain mechanism cover plate?
The conversion kit does not contain a new mechanism case cover plate.  If a cover plate is desired you would need the Fire or Less Dogging Cover Plate for EL conversion kit and panic cover plate fo...
Is there any way to lock the push side of an opening with a Von Duprin exit device?
You cannot lock the push side of the exit device as a panic device by design must allow exit.  Any attempt to block an exit is forbidden by code.