Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Von Duprin EL solenoid ”

Resolution: The best way to test the Von Duprin EL solenoid is with an ohm meter. You must test both coils to make sure the solenoid is good. The coil has three wires; green, yellow, and orange. The green...:

Are the Von Duprin EL and the HD-EL solenoids the same?

Resolution: The solenoids are different. The current standard EL solenoid and mounting bracket is a one piece unit. The bracket is crimped into the front of the solenoid. This solenoid and plunger has no mech...:

What would cause the Von Duprin EL Solenoid not to hold when the mech case cover plate is slid over top of the solenoid?

Resolution: If the cover plate on the mechanism case causes the EL solenoid to drop when slid over the solenoid, then the solenoid plunger requires adjustment. You must lengthen ...:

What Von Duprin solenoid crosses over to the solenoid part number 971687?

Resolution: If you are trying to replace Von Duprin EL solenoid part number 971687, the sellable part number for the solenoid and plunger is 050535. Please note that the solenoid is rarely the cause of E...:

What is needed to keep the EL device retracted all day?

Resolution: To keep the Von Duprin electric latch retraction EL or QELA exit device dogged (retracted) all day, have your access control, Key pad, key switch, fire alarm contact or any other signals ...:

How many thread should be showing on the solenoid plunger bushing on EL device to operate correctly?

Resolution: The threaded bushing on the solenoid plunger requires 8-9 threads showing to operate correctly.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Von Duprin EL solenoid ”

RELATED FAQS