Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
top latch replacement
”
RELATED FAQS
Question
Answer
Repalcement parts for Schlage Electronics 672 TouchBar and 692 SmartBar
Resolution:
See attached table: Schlage 692/672 Parts Cross ref:
What is the replacement for the Von Duprin 7321 keypad?
Resolution:
The VD 7308/7311/7321/7322 were replaced by the KP212 Von Duprin 7311 and 7321 key pads were discontinued and there are not direct replacements Von Duprin no longer sells key pads, contact Schl...:
What replaced the Von Duprin 372L trim?
Resolution:
The Von Duprin 372L & 370L/BE series trims are discontinued and there are no replacement for them. The new 33A/35A series exit devices use 360L trim. 370/BE trims were used with old style 33/35...:
EL Device Troubleshooting Guide
Resolution:
VISIT US.ALLEGION.COM/EL-SUPPORT FOR TROUBLESHOOTING VIDEO, DOWNLOADABLE GUIDE, AND INSTALLATION INSTRUCTIONS(For best viewing, use Chrome or Firefox browser.)ALLEGION EL SOLENOID ELECTRI...:
Do we make a blank trim plate to replace an existing trim?
Resolution:
We have several blank trims listed in the price book to cover existing trim prep in door. DEVICE EO TRIM 22 230EO 88 880EO 98/99 990EO or 996EO* 33A/35A Rim, 33/3...:
What is UBC 7-2?
Resolution:
The UBC (Uniform Building Code) was a regional legacy building code which was superseded in most jurisdictions by the IBC (International Building Code). There may be some areas of the country which...:
How to replace solenoid 991342?
Resolution:
That is the E996 Solenoid. It is sold as part 050814-00.To replace the solenoid, refer to the E996L Installation instructions.The trim must be removed from the door.Verify if the tr...:
Is the auxiliary fire latch (AFL) plug available as a service/replacement item?
Resolution:
Yes, the AFL strike plug is available. The part number is 050509.:
Why does my Trilogy Lock not retract the latch when I replace a lever trim on a 98/99 series device?
Resolution:
If the NL screw on the 99 device has been removed the Trilogy lock will not retract the latch. :
What would keep the vertical rod exit devices top latch from being held retracted in the open position?
Resolution:
Following exit devices 2227/F, 33/3527A/F, 33/3547A/48A/F, 98/9927/F and 98/9947/48/F have similar rod adjustment procedures. All top latches control the bottom latch assemblies. When do...:
Will the Von Duprin 7500 mortise lock replace an old 34 or 58 lock body?
Resolution:
The Von Duprin 7500 mortise lock body will replace the old style 34 and 58 lock bodies. Order a 7500 mortise lock in the proper finish. The old style strike must be replaced with 575 strike becau...:
What took place of the CM 993 lock?
Resolution:
The Von Duprin CM993 Computer Managed trim was used with 98/99 series exit device and is no longer available. There is not a direct replacement for CM993 trim. AD200/400-993 series are the clo...:
Are there any instructions for Von Duprin device maintenance?
Resolution:
Please see the Maintenance Kit Manual for information on device lubrication as well as complete breakdowns and parts lists for Von Duprin exit devices.Exit devices and latc...:
What is the Multi Point LM9300 Series?
Resolution:
MultiPoint locks are three-point locking systems that secure the door at three points – top, bottom, and traditional center latch location. Operating just like traditional locks, MultiPoint locks...:
How does the Von Duprin 88TP convert to an 88L?
Resolution:
Followings are the steps to convert the Von Duprin 88TP to 88L device. Need to replace the back plate on the 88 exit device, part number 050103. Order a 373L trim and specify handing. Recomme...:
What causes the top rod case to pull away from or strip out of the face of a steel door?
Resolution:
Hardware falling off a door is caused by one or all of the following issues: Field abuse Improper internal reinforcements in the door Improper field preparation The top or bottom rod case can...:
What is the part number to replace a top or bottom latch of a 98/9927 device that was built before October 1998?
Resolution:
050090 for bottom latch retrofit kit and 050091 for top latch retrofit kit.:
What is the Ives invisible latch replacement for the Glynn Johnson AA, BB and AP2 latches?
Resolution:
The Ives version is the same as old Glynn-Johnson versions.:
Schlage M420, M450, M490 - Armature Bolt Replacement
Resolution:
The armature bolt is not available on its own, but it is included in the armature mounting fastener pack, part# P44489128 for M450/M420 P44497110 for M490 :
Is the deadlocking spring replaceable on a 19-R device?
Resolution:
The spring itself is not replaceable, you would need to replace the 19 centercase assembly.:
How do I replace an E996L solenoid?
Resolution:
Order E-Trim Mech Kit part #050671-00 which will include a new solenoid already mounted to the blocking mechanism. See installation instruction # 921297 here which will show how to remove block...:
Can the Von Duprin 996L lever handle be replaced with a new one?
Resolution:
Yes, Von Duprin 996L lever handle can be replaced with a new one . Attached installation instructions shown how to replace the existing lever handle on 994/996L trim for rim and vertical rod device...: