Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
thin door spacer
”
RELATED FAQS
Question
Answer
Does the SL-Series door have a square edge?
Resolution:
The SL-Series door is a square edge non-handed door. A Hinge Filler (also referred to as Hinge Spacer) is the small removable trim part located on the door between hinge leaf and hinge reinforcem...:
What is the ANSI A115.1 Government 86 Door Prep for the L9000 lock?
Resolution:
See image, ANSI A115.1 Mortise Lock Prep This door prep requires the N escutcheon with the L283-029 spacer kit to keep the springcage from falling into the door.&nbs...:
What is the minimum stile for Schlage locks?
Resolution:
The minimum stile for each lock will depend on the backset and the rose diameter/escutcheon width. See the Schlage Minimum Stile Requirements for the minimum stile for eac...:
Is there a thick door kit for the B500 deadbolt?
Resolution:
B500 with standard cylinders How to order with the deadbolt:Door thickness over 1 3/4" to 2 1/4", specify door thickness when deadbolt is orderedDoor thickness greater than 2 1/4" will require...:
Does the B600 series fit on a 1-3/8" thin door?
Resolution:
The B600 (standard cylinder only) can be be specified for 1 3/8" thin doors and the appropriate parts will be supplied. Interchangeable cores are not available for 1 3/8" thin doors.:
What parts are needed to install an L lock on an 1 3/8" door?
Resolution:
The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped. The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...: