Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ templates for power transfer ”

RELATED FAQS

Resolution: All the templates can be found at us.allegion.com Please click here :

Where is factory recommendation for location of an EPT?

Resolution: EPT installation guidelines are as follows: Recommended location is 6" below top hinge per template Steelcraft will locate the power transfer prep at the Von Duprin re...:

Is there a template that shows where to drill the hole for E/EL/SS/RX/LX/CX wires?

Resolution: The hole should be drilled in the field once the end cap is located on the door. It is a 5/8" hole, that is located 5/16" from the end of the mechanism case. See installation instruction of t...:

Are EPT preps available on the Paladin Series door?

Resolution: EPT power transfer preparations are available on the Paladin PW14-Series door and FP14-Series frame. Electrified hinges are available on the Paladin PW14-Series door&...:

Do we have a maximum door width or height for using pivots?

Resolution: The maximum door width that pivots have been tested is a 4' wide door. Any door greater than 4' would shorten the life of the pivots. There is no maximum door height, for offset pivots the ru...: