Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ tailpiece for SFIC ”

Resolution: Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock ...:

What are the part numbers for the SFIC driver and spacer used on the ND series locks?

Resolution: There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer:

Will Falcon B locks prepped for BD accept a 6 or 7 pin core?

Resolution: The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core). The tailpiece shown below is used for bo...:

What is the part number for the SFIC tail piece for a W lock?

Resolution: Q330-168 SFIC Tailpiece (throw member for levers) Q330-169 SFIC Tailpiece (throw member for knobs) :

How to convert a ND series lock cylinder format from PD to BD?

Resolution: On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...:

Why does my key cylinder spin and not lock or unlock the ND?

Resolution: This could also happen if the tailpiece isn't installed in a KIL, FSIC, or SFIC cylinder. The FSIC driver also could have come loose from the core in the spindle. :

What is the part number for the Schlage small format rim cylinder tailpiece?

Resolution: B502-899 is the tailpiece for both the SFIC and standard rim cylinders.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ tailpiece for SFIC ”

RELATED FAQS