Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ tailpiece for large format ND series ”

Resolution: The ND-Series FSIC driver is part number N523-127.:

Resolution: The diameter of the ND rose is 3 7/16".:

What is the part number for T lock tailpiece used with a conventional cylinder?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 show...:

How long is the ND tailpiece for a thick door?

Resolution: Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock ...:

How to convert a ND series lock cylinder format from PD to BD?

Resolution: On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...:

How do you order the ND series lock with a small format core?

Resolution: The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ tailpiece for large format ND series ”

RELATED FAQS